Tape Data Recovery – Can Data Be Retrieved From Water Affected Tapes?

Although dealing with the debris carrying out a flooding incident, or where there’s been a higher amount of water ingress from fire suppressants (sprinkler systems, fire-fighter’s efforts), you discover some backup tapes. Can there be anything that you can do to recuperate the information from all of these? Or, will the results water ingress have destroyed a chance of seeing the information again?

The level from the contact with water along with other contaminants have a major effect on your time and effort needed for data recovery, and even whether data is going to be recoverable. If the effort needed is useful will be based upon the need for the information, if you’re fortunate enough to have records about tapes contents and so that you can visually find out the tapes then you definitely could possibly segregate the tapes and set probably the most valuable ones towards the mind from the queue.

So now you must some tapes, possibly with different levels of contact with water along with other nasty stuff that it could contain, what exactly next?

The First Step – Pre-categorisation from the tapes

Make an effort to categorise tapes in compliance using their importance. This may depend on having the ability to read physical labels, there being some surviving records, but when this can be done it might save your time, cost, and stop moment wasted on the tape that information is not requires although an important tape is sitting decaying.

Second Step – Prioritisation

Segregate the needed tapes through the extent of the exposure, consider this like a triage process. This can let the relatively fast handling of tapes with minor problems, although individuals with increased serious issues are assessed. You may at this time connect having a data recovery expert having a view to presenting their professional services, well you won’t want to be investing in getting data from tapes where there’s a little bit of water splashed around the situation, although unless of course you’ve considerable expertise with tape problems then trying to worked with media that’s been submerged in dirt or effluent might well be and not the best idea.

Like a guide, but at the own risk.

Class 1 – Splashes water around the outdoors from the tape, absolute confidence the tape is not submerged which within the tape cartridge is free of charge from fluids.

These tapes could be dried and put into a appropriate atmosphere for acclimatisation, there should then not be any reason data can’t be restored normally.

Class 2 – Immersed in water, but no manifestation of contaminants (dirt etc). The immersion wasn’t more than a protracted time, so a maximum of a couple of hrs.

Chances are these tapes have water inside the tape mechanism plus they shouldn’t be used inside a drive. The possible lack of any residue around the outdoors means that it’s fairly freshwater which has affected them. These can still require careful cleaning internally, however the prospects for an entire recovery are good.

Class 3 – Lengthy term immersion, greater than a couple of hrs, plenty of grime and nasty stuff, or maybe ocean water is involved.

These will likely require re-casing and lots of careful cleaning. With long term immersion there’s a larger possibility of water ingress towards the tape pack – the tape around the supply reel. Tape is fairly robust, however the longer the immersion the higher the possibility of loss of data. The key factor is the fact that they are rapidly worked with, a minimum of to encourage them to a category 2 condition.

For Sophistication 2 and sophistication 3 listed here are critical:

Remember your personal health. It’s the contaminants within the water which will create problems for that tape, but possibly furthermore you. Are you aware where all the water originated from?

Don’t let the tapes dry up. It’s not water that triggers the issue what it has. The drying process leaves deposits around the tape surface, possibly it can lead to harm to the tape. Seal the tapes so they don’t dry up.

Obtain the tapes worked with rapidly, meanwhile keep these questions awesome place. The more waiting the higher possibility of problems. Water may be the sustainer of existence, so it won’t take lengthy for mould to build up.

Do you know the risks?

Should you make an effort to read data from the tape where there’s internal corrosion, the whole shebang are gummed up, or there’s residue around the tape, then you may damage both drive and also the tape. The drive will require repair, there will likely be data lost in the tape and you can finish up never seeing your computer data again, or getting to begin an costly data recovery.

If uncertain tape professional advice.

Mark Sear has tried data recovery, data conversion, data migration and computer forensics because the early 1980s being employed as a data recovery engineer, software developer or more until 2006 because the Technical Director of among the word’s leading data recovery companies with offices within the United kingdom, Germany, US and Norwegian.

These companies are good at what they do because their entire business is based on computer and tape data recovery and retrieval. Sometimes, depending on where you live, they can be cheaper than your local computer repair shops for recovering data.

Related Articles

Back to top button